True-colour 3D models from every angle
Thousands of overlapping ROV images become one measurable, textured 3D model. Engineers can walk around the asset, measure it and see its real condition, without ever getting wet.
See It, Measure It, Share It
Video shows what an inspector saw at a single moment. A photogrammetric model keeps everything: every surface, in true colour, at true scale, in one file you can open again in five years and compare.
- Real colour and texture for spotting cracks, spalling, corrosion and growth
- Measure lengths, areas and volumes directly on the model
- Orthomosaics give flat, scaled images of walls and faces
- Easy for non-specialists to understand and share

From Photos to a 3D Model
Step through the four stages our processing follows. This illustrative model shows what happens at each stage; drag to look around at any point.
Coverage & Resolution Calculator
Photogrammetry quality depends on distance, camera and overlap. Adjust the sliders to see how stand-off distance, ROV speed and frame rate change the image footprint, detail (ground sample distance) and overlap. We aim for at least 70% overlap on every survey.
A 3D Model That Showed What Video Couldn't
Our best photogrammetry model to date came from inside a stainless-steel-lined aqueduct in an alpine hydro scheme.
The challenge
Assess the condition of a thin stainless steel liner, including any deformation, buckling or change in ovality. Shiny steel reflects the ROV lighting straight back into the camera, which makes photogrammetry difficult.
Our approach
Careful lighting angles, steady stand-off and heavy image overlap along each pipe section, then photogrammetric processing into textured 3D models linked directly from the inspection report.
The result
The 3D models clearly revealed a buckling lobe in the liner, a profile deviation extending along the pipe that was caused by external water pressure and was very hard to read from video alone.
Above the Water and Below It
Choosing between photogrammetry, sonar or a hybrid depends on the environment. On a dam with low visibility, 2D imaging sonar captures the submerged wall efficiently, while an aerial drone captures the face above water. Stitched together, they give one referenced model from the crest to the bed.

Steel pile wall: photogrammetry above the waterline joined seamlessly to 2D multibeam imaging sonar below.

Dam structure: photogrammetric imagery of the emergent wall joined to an underwater sonar mosaic of the submerged face.

Accuracy Built In
Overlap
70–80% overlap between frames, with extra passes on complex geometry.
Scale control
Scale bars, laser scale points or stereo baselines fix true size.
Lighting
Even, high-CRI LED lighting reduces shadows and backscatter.
Stand-off
Constant distance from the surface, chosen to suit visibility.
Where Photogrammetry Shines
Dam Faces
Condition mapping of spillways, intake towers and upstream faces.
Defect Records
3D records of cracks, spalls and damage for repair design and monitoring.
Marine Assets
Piles, jetties, hulls and moorings in clear coastal water.
Heritage & Science
Wrecks, habitats and artefacts recorded without disturbance.
Want a True-Colour 3D Record?
Tell us about the asset and the water. We'll advise whether photogrammetry, sonar or a hybrid model will give you the best result.